Kingston HyperX 4Gb DDR3 1600MHz (2x2Gb) Memory Kit

 
 
thumb

Printer FriendlyShare By EmailShare On FacebookShare On TwitterShare On Pinterest
  Kingston
Eclipse Sku: MEK-D3-4096H16
Brand : Kingston
Model: KHX1600C9D3K2/4G
EAN:
More Information >>>


Discontinued

 
 
Alternative products
Corsair Value Select 4Gb DDR3 1333 Memory Module
Inc Vat
Special Order Item
Dispatched 2-3 Days
Verbatim 16Gb 49063 PinStripe Flash Drive - Black
Inc Vat
Special Order Item
Dispatched 2-3 Days
Kingston ValueRAM 2Gb DDR2 667MHz 240Pin Memory
Inc Vat
Special Order Item
Dispatched 2-3 Days

DDR3 is the third generation of Double Data Rate (DDR) SDRAM memory. Similar to DDR2, it is a continuing evolution of DDR memory technology that delivers higher speeds (up to 1600 MHz), lower power consumption and heat dissipation. It is an ideal memory solution for bandwidth hungry systems equipped with dual and quad core processors and the lower power consumption is a perfect match for both server and mobile platforms. Dual In-line Memory Modules, or DIMMs, closely resemble SIMMs. Like SIMMs, most DIMMs install vertically into expansion sockets. The principal difference between the two is that on a SIMM, pins on opposite sides of the board are tied together to form one electrical contact; on a DIMM, opposing pins remain electrically isolated to form two separate contacts.

  • JEDEC standard 1.5V ± 0.075V Power Supply
  • VDDQ = 1.5V ± 0.075V
  • 533MHz fCK for 1066Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 6, 7, 8, 9, 10
  • Posted CAS
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7(DDR3-1066)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C
  • Asynchronous Reset
  • 1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5
  • PCB Height: 1.180 inch (30.00mm), double sided component


  • © Copyright 2004 Eclipse Computers. All Rights Reserved.
    Images for illustrative purposes only.


    Need Assistance? Contact Us On:
    02476­ 500­ 100

    or sales@eclipsecomputers.com